Easy Ramps

Ramp Sizes and Installation

Ever wish you could park your mower in your new mini barn?  Or just wish you didn’t have to step up every time?  Problem solved!  With the all pressure treated construction and quality workmanship these ramps are just the thing you need.

The ramps are built of pressure treated 2×4 joists with pressure treated deck boards for the floor.  They are attached to the barn by a galvanized metal bracket.

NOTE: These ramps were designed for doors with a maximum of 1 1/2 inches below the subfloor.  If the door is lower than 1 1/2 inches you will need to take the door off and cut the bottom of the door.

Available Sizes

SIZE PRICE
4′ W x 4′ L $115
4′ W x 5′ L $145
4′ W x 6′ L $160
5′ W x 4′ L $150
5′ W x 5′ L $170
5′ W x 6′ L $200

Recommended ramp length for height of barn floor:

0-15 in. = 4′ ramp
15-20 in. = 5′ ramp
20-25 in. = 6′ ramp

3 Step Easy Installation

Tools Required for Installation:

  • Drill
  • 2 1/2 inch or longer screws
  • Hammer or shovel for leveling

Steps for Installation:

  1. Position the metal bracket in the center of the door.  Ramp should be completely against the barn.
  2. Screw the bracket to the floor.  Only use 2 1/2 inch or longer screws.
  3. Level the ramp (if needed).  Use a hammer, shovel, or most anything to dig out underneath the ramp joists.